Ceramic tile Over Tile: Radiant Heated Bathroom Floor

Floor tile over floor tile indicates precisely just what it states, yet in this instance you’re mosting likely to sandwich a layer of radiant heat floor coverings in between the old and also the brand-new floor tile. Ceramic tile over floor tile is a very easy method to prevent the mess related to wrecking the old restroom flooring, yet needs complete preparation.


Prior to you set up a glowing warm floor covering over the old washroom floor tile as well as mount brand-new floor tile over the floor covering, you must examine the flooring for deflection. Ceramic floor tile is difficult as well as will certainly displace or damage if the surface area flexes under the lots.

Stand in the center of the shower room flooring as well as raise as well as down. , if the flooring relocates it has a deflection trouble as well as is not an excellent prospect for floor tile over ceramic tile setup till you enhance the sub-floor.


Stay clear of That Sinking Feeling:

Because you’re tiling over ceramic tile, you have to intend ahead of time to stay clear of making the bathtub, vanity as well as bathroom resemble they’re “sinking” right into the brand-new flooring.

Several of the brand-new glowing home heating floor coverings are no thicker compared to the deepness of the mortar you would usually use for a lot of floor tile installments. Incorporate this with a floor tile density of 1/4 inch as well as the optimum altitude over the old flooring would certainly be just 1/2 inch.

One method to maintain the shower room components from looking engulfed by the brand-new flooring is to re-install the wall as well as get rid of. Even better, why deny brand-new wall floor tile to match the brand-new flooring?

The increased elevation of the brand-new flooring will certainly additionally need you to change the size of the door( s) as well as potentially set up a brand-new limit.

Prep work:

Eliminate or re-attach busted ceramic tile items. Wait up until the flooring has actually been fined sand as well as completely vacuumed prior to you fill up the areas with mortar if you eliminate them.

If any one of the ceramic tiles have checks bigger compared to 1/8″, you must take into consideration a split seclusion membrane layer. This membrane layer is a roll on item that you put on the old floor tile. The membrane layer enables the brand-new flooring to removal separately of the old.

Next off, sand the old floor tile so the mortar has a great bonding surface area. A belt sander would certainly guarantee a constant bonding surface area.

Please ensure you put on a face mask and also shatterproof glass while fining sand. The ceramic tiles could have been terminated with hazardous lead polish.

After fining sand, clean and also vacuum the ceramic tile with an all function cleaner. Pay unique focus on the locations untouched by the sander.


Turn out the floor coverings upreared to your requirements by the producer. Some glowing systems, like Quickmat, are self-adhesive as well as need no mortar to protect them to the old ceramic tile flooring.

Maintain some scrap as well as a board 2 x 4’s helpful to secure the floor coverings when the shower room is being utilized if you’re re-tiling the only washroom.

Throughout the setup procedure, utilize an electronic ohm meter to examine the resistance of the home heating floor coverings. This will certainly aid you check the floor coverings for brief circuits.

Have your electrical expert link the home heating floor coverings to the source of power as well as mount the thermostat. Depending upon the regional electric assessment treatments, you could need to wait up until the task is checked prior to you begin laying ceramic tile.

Trowel out the mortar over the floor coverings. Some makers advise latex- customized or epoxy-modified mortar as well as cement as opposed to water-based multi-purpose adhesives. Mortar beds thicker compared to 3/8 inch need to function great for the majority of systems; they simply take a little longer to warm up.

Considering that you will not be covering the whole flooring with home heating floor coverings, make certain the mortar used over open locations, (under the commode) is degree with the mortar protected floor coverings.

Do not bang the trowel on the floor covering or home heating cord to get rid of excess mortar from the trowel. This might cut the home heating cable.

At this moment, you would certainly lay the ceramic tile. Method on your next-door neighbor’s washroom flooring if you have no experience tiling.

Fire It Up!

Your brand-new glowing warmed restroom flooring looks lovely and also you can not wait to obtain cozy feet. Do not place the system right into complete procedure till the mortar is completely treated.

Prior to you set up a glowing warmth floor covering over the old restroom floor tile and also set up brand-new ceramic tile over the floor covering, you need to examine the flooring for deflection. Ceramic floor tile is difficult and also will certainly remove or damage if the surface area flexes under the tons. If any of the ceramic tiles have checks broader compared to 1/8″, you need to think about a split seclusion membrane layer. This membrane layer is a roll on item that you use to the old floor tile. Your brand-new glowing warmed shower room flooring looks stunning as well as you cannot wait to obtain cozy feet.

Texas Real Estate Commission Information About Brokerage Services
Please Share...We also share...Enjoy